Page 1 of 1
Technical Questions (FireWire, MinDV, etc...)
Posted: December 26th, 2008, 12:18 am
by whmatthews
Got some questions about this video camera I got for Christmas. In the other thread, flamesbball84 helped me out!
Ok, apparently any video I take on this camera will not transmit video to my pc via the USB that came with it... only still images. According to the JVC website, I have to get either a 4-4 DV cable or a 4-6 DV cable. How am I supposed to know which one to get? I'm not sure where I'm supposed to plug it in on my computer. Any help would be much appreciated.
Posted: December 26th, 2008, 10:21 am
by Cider Jim
Wouldn't all that kind of thing be explained in great detail in your owner's manual that came with the camera?
Posted: December 26th, 2008, 10:26 am
by RubberMallet
what camera did you get
Posted: December 26th, 2008, 11:20 am
by whmatthews
Nothing in the owner's manual about which wire I should get. Just shows a picture of it and says "DV Cable" My camera is a JVC GR-D77OU. I googled it and a lot of people had complaints about not being able to upload video, then I went to jvc.com/support and saw I needed that cable - just don't know which one to get.
Posted: December 26th, 2008, 11:34 am
by Hold My Own
connect it using fire wire...should be faster
Posted: December 26th, 2008, 12:04 pm
by whmatthews
Where do I get that, what kind do I need? blah blah blah...
Posted: December 26th, 2008, 12:06 pm
by SuperJon
You gotta make sure your computer has a firewire input first.
It's the input on the left.
You can get it at Best Buy.
Posted: December 26th, 2008, 12:09 pm
by Hold My Own
Go to bestbuy say I need firewire for my minidv....I'm thinking that Medic has been over taken for the most Technology challenged on the board!
Posted: December 26th, 2008, 12:36 pm
by whmatthews
Hold My Own wrote:Go to bestbuy say I need firewire for my minidv....I'm thinking that Medic has been over taken for the most Technology challenged on the board!
I think so!
Posted: December 26th, 2008, 12:38 pm
by whmatthews
SuperJon wrote:You gotta make sure your computer has a firewire input first.

It's the input on the left.
You can get it at Best Buy.
I have the firewire input (actually, I have two!)... thanks for all the help.
Posted: December 26th, 2008, 3:20 pm
by PAmedic
Hold My Own wrote:Go to bestbuy say I need firewire for my minidv....I'm thinking that Medic has been over taken for the most Technology challenged on the board!
I don't know about that- I'm not familiar with any of these things mentioned- I still use cable co-ax to hook up my TV
Posted: December 26th, 2008, 3:46 pm
by Fumblerooskies
You need to make sure you have the RIGHT Firewire cable. Some are 4-pin to 6-pin...others are 4-to-4. You want to make sure the cable matches both the input to your camera and also the input to your computer.
Posted: December 26th, 2008, 11:30 pm
by flamesbball84
just take your camera to bestbuy or someplace like that and let them do all the work.
Posted: December 27th, 2008, 10:37 am
by whmatthews
flamesbball84 wrote:just take your camera to bestbuy or someplace like that and let them do all the work.
Will do. I don't have a BestBuy in town, will RadioShack work?
Posted: December 27th, 2008, 10:48 am
by Fumblerooskies
whmatthews wrote:flamesbball84 wrote:just take your camera to bestbuy or someplace like that and let them do all the work.
Will do. I don't have a BestBuy in town, will RadioShack work?
Yeah...they should have the firewire connectors, too.